- AISI 304 quality stainless stell
- The first wall base is 2 mm and 0.8 mm Ep type laser wlded cooling evaporator surface is coupled to the wall
- 1. wall body 1.5 mm
- Insulated body 1 mm
- Cooling unit, tank body is mounted on one-piece chassis.
- One 25 W, 21 rpm reducer and a stainless steel agitator blade connected to it are available. The insulation thickness is 50 mm and made of HCFC-free waterbased high-density polyurethane foam material
- Product outlet has a DN50 male union butterfly valve
- A spring cover is available.
- There is a O 200mm product inlet lid on the cover. A manual measuring scale with a precision ration of 3-4% is available.
- Adjustable bolt feet are available on the bottom. It is designed sp that zero liquid remains inside during the discharge. Welded areas are 1st class Argon TIG weldin and 1 st class smooth polished.

- Fast and frost-free cooling according to minimum milk quantity
- Minimum amount of gas charge
- A 404 gas cooled Peymak Milk Cooling Tanks provide the possiibility of cooling each milk (32 C-3ı8 C) from 35 C to 4 C at ambient temperature.
- Direct cooling system Certificate of conformity to TSE 13732/CE/EAC standard Test compliance report. Optional designs for 2-line, 4-line and 6-line milking systems availabl

- Electrical panels with protection class IP 65
- 200Lt AND 1000Lt tanks are capable of operating with 220 volt, 1000Lt and above capacities with 380 volt energy.
- Temperature display with digital thermometer
- Specially designed electronic control card for easy operation of the tank and control of milk temperature Phase protection relay The system is automatically deactivated when the tank cover is opened.
- Automatic mixing program with special software; after the milk reaches the desired set value, the operating time of the mixer can be adjusted in the desired intervals. (3 minutes operation and 10 minutes stop)

- Manual wash